Heart & DSP Card
Inspired by a card design by Penny Thomas (my upline!!)
Birthday Basics Designer Paper Series (page 153)
$10.95 - 130145
(12 sheets, 2 ea. of 6 double sided designs, 12" x 12")
Cardstock: Whisper White, Raspberry Ripple
Designer Series Paper: Birthday Basics
Punches: Full Heart, Itty Bitty Shapes Punch Pack
Embossing Folder: Needlepoint Border set
Embellishment: Rhinestone Basic Jewels
Other: Essentials Paper Piercing Pack, Paper Piercing Tool, Pierce Mat, Multipurpose Liquid Glue, Dimensionals
Modern Medley Card
inspired by a design by Penny Smiley
Chalk Talk Stamp Set (page 12)
Wood $25.95 - 130631 or Clear $18.95 - 130634
Stamp Set: Chalk Talk
Cardstock: Very Vanilla, Basic Black
Designer Series Paper: Modern Medley
Ink: Basic Black
Punches: 1 3/8" circle, large oval
Embellishments: Very Vintage Designer Buttons, Large Basic Pearl Jewels
Other: Paper Snips, Glue dots, Snail adhesive
Tip!
- Use several glue dots under the pearl to ensure it fit in the pearl's "dimple"
Here's how to make the bow with the Large Oval Punch:
- Punch 3 ovals out of the DSP
- Fold all 3 in half
- Cut a dovetail in the first one, you'll end up with 2 dovetail pieces. Set aside.
- On the other 2 folded ovals, put a dab of adhesive on the curved part and press together.
- Put the 2 units together with a dab of adhesive
- Adhere the 2 dovetail pieces to your bow piece, arranging them so they go past the folded ovals.
- Turn your piece and voilà!
- Cover the center area with an embellishment like a button, or a 1/2" circle punched out of cardstock.
Thank You card with Chalk Technique
Stamp Set: Chalk Talk, Oh Hello
Cardstock: Real Red, Basic Black, Whisper White
Ink: Real Red
Embellishments: 1/8"Taffeta Ribbon (Basic Black), Hung Up Cute Clips
Other: White Stampin' Chalk Marker (in Holiday catalog, available August 1st), Heat Gun, Embossing Buddy, White Embossing Powder, Dauber, Stampamajig, Dimensionals
Non SU: Chalk stick
Tip!
- For a chalkboard appearance, rub a stick of chalk over your black cardstock and rub off the excess chalk with a dauber.
Tape It Happy Birthday
The original idea is from Heather Heroldt on Stampin' Connection.
I changed the colors, greeting stamp set and
used the Ornament Punch from the Merry Minis Punch Pack for the flames.
Tape It Stamp Set (page 127)
Wood $26.95 - 130712 or Clear $18.95 - 130715
Bring on the Cake Stamp Set (page 14)
Wood $38.95 - 128490 - Clear $27.95 - 121958
Stamp Sets: Tape It, Bring On The Cake
Cardstock: Tangerine Tango, Whisper White, Daffodil Delight
Ink: Tangerine Tango, Old Olive, Melon Mambo
Punch: Merry Minis
Embellishments: Candy Dots (Brights)
Other: Essentials Paper Piercing Pack and pencil (to mark placement of candy dots), Clear Blocks, Paper Trimmer
Oh Hello Card with Sunburst Technique
This is inspired from the card on page 110 of the catalog
Oh Hello Stamp Set (page 34)
Wood $25.95 131931 - Clear $18.95 130733
Stamp Set: Oh Hello
Cardstock: Whisper White
Designer Series Paper: Eastern Elegance
Ink: Crushed Curry
Ribbon: Coastal Cabana 3/8" Ruffle Stretch Ribbon
Button: Faceted Designer Buttons
Baker's Twine: Whisper White colored with Coastal Cabana ink.
Tips!!
- Stamp the greeting first, just in case you make a mistake stamping later on, you won't waste all the DSP and your time :-)
- To make triangles out of DSP: cut strips of 4" x 1 1/2" and then cut them diagonally
- To make custom colored twine: use a dauber to hold the twine over your ink pad, and pull to die the twine. Continue until the whole piece is colored. It takes a few minutes to dry!
- Use Sticky Strip to hold the ribbon
Sunburst Photo Tutorial:
Before you start:
- Cut strips of DSP 4" x 1 1/2" and cut them in half diagonally. You'll need about 8 or 9.
- Cut a the base panel 5" x 3 3/4"
- Stamp your greeting first (see note above)
- Center it on your grid paper and place a extra wide Post It note across, hiding 1 1/2" from the bottom of the panel.
- Put Two Way glue or Snail adhesive all over the uncovered portion of the panel
- Starting on each side, line the first 2 pieces of DSP along the Post It note.
- Continue with the other strips. I did not overlap my triangles
- The last triangle may need to overlap the two next to it. If so, use a little Snail adhesive on each side.
- Turn the panel over and trim the excess DSP on all 3 sides.
- Put a strip of Sticky Tape along the edge and place the Ruffle Ribbon.
- Add a button and twine with glue dots.
- Use dimensionals to place the panel on your card.
I hope this will help.
Email me if you have questions.
Setting Sail Nautical Card
Setting Sail Photopolymer Stamp Set
$13.95 - 133453
Stamp Set: Setting Sail
Cardstock: Naturals Ivory, Midnight Muse, Cherry Cobbler
Ink: Midnight Muse, Cherry Cobbler
Embellishments: 3/4" Chevron Ribbon (Cherry Cobbler), 7/8" Cotton Ribbon, 1/8" Mini Silver Brads
Other: Essentials Paper Piercing Pack, Paper Piercing Tool
Non SU: stapler, staple
Tip!
- Cut strips of Midnight Muse 4 1/4" x 1/2" and place every 1/2 inch.
- The card front is made on a 4 1/4" x 5 1/2" panel of Naturals Ivory cardstock. Then the ribbon are tucked in the back and stapled in place. The panel is then adhered to a folded card out of the Naturals Ivory cardstock.